Use Event Outlines to build your event outlines (production notes, run sheets, event resumes, and so on) in Momentus Elite with a block-based document editor. In the editor, you can customize formatting and connect data from the event, so you only need to keep one source of truth. When you update the event, the outline updates too. You can also create templates for outlines you want to reuse, so you don't need to start from the beginning each time.
The Operations Hub is available as an add-on for Elite Premier users.
In this article:
- Create an Event Outline
- Share an Event Outline
- View Event Outlines on an Event
- Event Outline Templates
- Duplicate an Event Outline
- Edit an Event Outline
- Block Details
Create an Event Outline
To create an event outline:
- Go to the event's Event Dashboard and click the arrow by Event Outlines. The Event Outlines page opens.
- If the event has no outlines yet, a new outline opens. If you already have event outlines, click + Add New in the left sidebar. The new outline has the name Untitled, the status Draft, and one text block in the editor.
- Click Untitled and rename the outline.
- Place your cursor where you want to insert a block, then click a block in the right sidebar to add it.
- If you have content in the current block, click the plus by a block to add a block below it.
- If you don't have content in the current block, click the plus or type a forward slash
/to choose a type of block to add. - Click the six-dot menu by a block to see more options, including moving the block up or down, duplicating the block, or deleting it.
- See the details for each type of block below.
- When you finish editing:
- If the outline isn't complete yet, you can leave the page. Your work saves automatically, so you don't need to click a Save button.
- If the outline is complete and ready to share, publish it. Click the arrow in the status chip and select Publish. All users with View or Edit permission can now open the outline.
You can also start a new outline from the event. On the event Documents tab, click the Event Outlines tab, then click +. Ops Hub opens with a new outline.
Share an Event Outline
You can share an Event Outline PDF with a secure link. People with the link can open the document without system access. You can also attach Event Outlines to jobs. The link always points to the latest published version of the document.
To share an Event Outline:
- Publish the event outline.
- Click Share and select Enable shareable link.
After you turn on the shareable link:
- Click Copy Link to share the PDF version of the document.
- The PDF version of the document is available in Jobs Management, where you can attach it to jobs.
The link always points to the latest published version of the Event Outline. If you put the outline back into Draft status, the link keeps pointing to the last published version. If you publish a newer version while the link is on, the link updates to the newest published version.
When you turn off Enable shareable link:
- The Copy Link button stops working.
- People with the link can no longer open the PDF. They see a message that says it isn't available.
If you turn it back on later, the link works again and points to the latest published version of the document.
View Event Outlines on an Event
If your organization uses the Operations Hub, you can view the published outlines for an event on the event's Documents tab.
All users see the Event Outlines tab. You see outlines only if you have permission to view them.
- On the event details page, click the Documents tab.
- Click the Event Outlines tab. The list shows the name, current revision, status, and created date of each published outline.
- Open an outline:
- If the outline has sharing on, click its icon to open it in the PDF viewer.
- If you have view or edit access to Event Outlines, click the icon to open the outline in the Operations Hub.
- To create an outline for the event, click +. Ops Hub opens with a new outline.
Event Outline Templates
You can create event outline templates to use across all events. For example, you can create templates for different types of sporting events, or for an orchestra event and a musical. See Event Outline Templates for more information.
Duplicate an Event Outline
If you want a similar event outline on the same event, you can duplicate an existing outline rather than start from the beginning. To duplicate an outline, open the outline in the editor. Click the three-dot icon in the header and select Duplicate.
Edit an Event Outline
To edit an event outline:
- Go to the event's Event Dashboard and select the outline.
- If the outline is a draft, it opens in edit mode.
- If you already published the outline, it opens as a preview. In the right sidebar, click Edit to open the editor. This creates a new version. For more about version control, see below.
- You can now add blocks or update the information in a block. See the block details below for block-specific information.
- When you finish editing:
- If the outline isn't complete yet, you can leave the page. Your work saves automatically, so you don't need to click a Save button.
- If the outline is complete and ready to share, publish it. Click the arrow in the status chip and select Publish. All users with View or Edit permission can now open the outline.
Version Control
If you edit a published outline, its status changes back to Draft, and a new version starts. For example, the published outline is version 1, and the new draft is version 2. To view prior versions, click the three-dot menu in the header and select Version History. Here you can:
- View a previous version: Click the three-dot menu by the version and select View Version.
- Restore a previous version:
- Click Edit to open the editor.
- Select the version in the Version History list and click Restore, or if you are viewing the version, click Restore this version. The version you restore replaces the contents of the latest version.
Data Block Refresh
Refresh the data in your data blocks to match any changes to the event while you work. To refresh data, click the three-dot menu in the outline header and select Sync Data.
Block Details
Basic Blocks
- Headings: Click the arrow on the right of the Heading chip and select the heading level. H1 is the largest. Use headings to create an outline in your document.
-
Text field: Use text fields to add as much text as you need. In the text block, click the six-dot icon to access more options:
- Convert to: Changes the text block to a heading, bulleted list, numbered list, checklist, or quote.
- Set the text alignment.
- Set an anchor link.
- Table: When you click the Table block, the Modify Table modal opens. Here you can build your table and add content. Click Save to add the table to your document. To edit the table after you add the block, hover over the table block and click Modify Table to reopen the modal.
- Image: When you click the Image block, the Insert Image modal opens. Here you can upload the image. The modal has editing tools, but we recommend you edit the image before you upload it. The recommended image size is 275px 185px. The image file can't be larger than 2 MB and must be a JPG, JPEG, or PNG file. To edit or replace an image after you add it, click the six-dot icon and select Edit Image to reopen the modal.
- Divider: Adds a line across the width of the page. You can adjust the width, thickness, and style of the divider.
- Page Break: Your browser's print settings set the page breaks for the document. Use a Page Break block to add a page break where you want one.
Data Blocks
-
Event Details: Add the event name, event date, or account name.
- When you click it, a modal opens:
- Add an optional title for this section
- Select which details to add.
- Click Insert event details.
- After you add the block, hover over it to see the editing options:
- Data: Opens the data modal you used when adding the block. Click to update the title and modify which event data displays.
- Display: Select how the data should display: as a table with each data item in a column, as a table with each data item in a row, or as a list. You can set the table options to have the default spacing or compact.
- When you click it, a modal opens:
-
Contacts: Add contacts and contact information to the outline.
- When you click it, a modal opens:
- Add an optional title for this section.
- Select which contact data should display: name, title, account, and more.
- Filter which contacts should display by account type, contact tag, or both.
- Set how the contact list should sort.
- When you finish, click Insert contact details.
- After you add the block, hover over it to see the editing options:
- Data: Opens the data modal you used when adding the block. Click to update the title and modify data options.
- Display: Select how the data should display: as a table with each data item in a column, as a table with each data item in a row, or as a list. You can set the table options to have the default spacing or compact.
- When you click it, a modal opens:
-
Event-wide Functions:
- When you click it, a modal opens:
- Select the event-wide functions to display and click Next.
- Add an optional title for this section.
- Select the function data to include: Name, date, times, room, and more.
- You can include instructions from the event-wide function. Select the departments and categories to show. Event outlines don't show items.
- Select whether to show departments that have no instructions.
- When you finish, click Finish and insert details.
- After you add the block, hover over it to see the editing options:
- Data: Opens the data modal you used when adding the block. Click to update the title and modify data options.
- Display: Select how the data should display: as a table with each data item in a column, as a table with each data item in a row, or as a list. You can set the table options to have the default spacing or compact.
- When you click it, a modal opens:
-
Function Details: Add a list of functions with selected function information. You can't add function items and instructions to event outlines. Operations staff get these through Jobs.
- When you click it, a modal opens:
- Add an optional title for this section.
- Select how to group the functions: by date, room, timeline (in chronological order with no grouping), or type.
- Select the function data to include: Name, date, times, room, and more.
- Filter and sort the functions: click the arrow to open the Filter and Sort section. Here you can:
- Filter by date, status, or type.
- Filter by rooms, and exclude no-room functions if needed.
- Select only functions marked as a performance, or functions marked to display on the event calendar.
- Sort the functions by a particular field.
- After you add the block, hover over it to see the editing options:
- Data: Opens the data modal you used when adding the block. Click to update the title and modify data options.
- Display: Select how the data should display: as a table with each data item in a column, as a table with each data item in a row, or as a list. You can set the table options to have the default spacing or compact.
- When you click it, a modal opens: